Bioconnect Safety (DIN) Snap Lead

Meeting ANSI/AAMI EC53 specifications and the requirements of DIN 42-802

Color coding indicates the part of the body where leads are attached. AHA/AAMI (American Hospital Association/Association for the Advancement of Medical Instrumentation) is used in the U.S., while IEC (International Electro-technical Commission) is used in Europe and other parts of the world. “Standard” indicates the primary configuration used. “Alternate” stands for the secondary configuration.

Color Codes AHA/ AAMI   IEC  
Left armLABlack LYellow
Right armRAWhite RRED
Left legLLRed FGreen
Right legRLGreen NBlack
ChestCBrown CWhite
Chest position 4V4Blue   
Chest position 5V5Orange   
Download PDF to Printout
Snap Leads
Snap
  • Low profile, insert molded Santoprene® (TPE) snap leads offer secure attachment to snap electrodes. Classic teardrop design reduces tangling and increases patient comfort. Color coding per AHA and IEC standards. Snap overmolding can be customized with logo or use indicators in any requested color.
Strain Relief
  • Uniquely designed, molded Santoprene® strain relief are designed to extend life expectancy of leads with improved flexibility.
Leadwire
  • Latex-free TPR insulation is impervious to most cleaning solvents and can be sterilized using most common methods: gamma irradiation and EtO. All unshielded leadwire features 65-strand conductor and Santoprene® jacket for increased flexibility and flex life. By using the same material for molding flex relief and in the jacket, the maximum bond is achieved between components.
Socket
  • Recessed lead wire sockets are molded of Santoprene® over a gold plated 1.5mm BeCu spring contact and meet the requirements of DIN 42-802 and ANSI/AAMI EC53 specifications.
Santoprene
  • Santoprene® rubber, which is latex free, is compatible with most cleaning solvent and can be sterilized using most common methods: gamma irradiation and EtO.